Dell XPS 13 Plus 9320 Service Manual page 50

Table 3. System setup options—Overview menu (continued)
Overview
AC Adapter
PROCESSOR
Processor Type
Maximum Clock Speed
Minimum Clock Speed
Current Clock Speed
Core Count
Processor ID
Processor L2 Cache
Processor L3 Cache
Microcode Version
Intel® Hyper-Threading Capable
64-Bit Technology
MEMORY
Memory Installed
Memory Available
Memory Speed
Memory Channel Mode
Memory Technology
DEVICES
Panel Type
Video Controller
Video Memory
Wi-Fi Device
Native Resolution
Video BIOS Version
Audio Controller
Bluetooth Device
Pass Through MAC Address
Table 4. System setup options—Boot Configuration menu
Boot Configuration
Boot Mode: UEFI only
Boot Sequence
Secure Digital (SD) Card Boot
Secure Boot
Enable Secure Boot
50 System setup
Displays whether an AC adapter is connected. If connected, the AC adapter type.
Displays the processor type.
Displays the maximum processor clock speed.
Displays the minimum processor clock speed.
Displays the current processor clock speed.
Displays the number of cores on the processor.
Displays the processor identification code.
Displays the processor L2 Cache size.
Displays the processor L3 Cache size.
Displays the microcode version.
Displays whether the processor is Hyper-Threading (HT) capable.
Displays whether 64-bit technology is used.
Displays the total computer memory installed.
Displays the total computer memory available.
Displays the memory speed.
Displays single or dual channel mode.
Displays the technology that is used for the memory.
Displays the Panel Type of the computer.
Displays the integrate graphics information of the computer.
Displays the video memory information of the computer.
Displays the Wi-Fi device installed in the computer.
Displays the native resolution of the computer.
Displays the video BIOS version of the computer.
Displays the audio controller information of the computer.
Displays whether a Bluetooth device is installed in the computer.
Displays the MAC address of the video pass-through.
Displays the boot mode of this computer.
Displays the boot sequence.
Enables or disables boot from Secure Digital card.
By default, Enable Secure Digital (SD) Card Boot is selected.
Enables or disables the computer to boot using only validated boot software.