Problem Areas
1.9
Vibrator
Check:
Inspect the BtB connector on the Front Assembly and the
BtB connector on the Main PBA.
Action:
1. If not properly connected – disconnect and reconnect
connector.
2. If dirty or oxidized – clean connector.
Check:
Inspect the connectors of the vibrator.
Action:
1. If not properly connected – disconnect and reconnect
connector.
2. If connector on Front Assembly flex is damaged – replace
the Front Assembly.
3. If Vibrator connector are damaged – replace the Vibrator
1273-1793 Rev 3
Sony Mobile Communications AB – Company Internal
Trouble Shooting Guide (mech)
17(44)