Replacement
4.14 Adhesive Conductive Vibrator
Follow the 3.2 and 3.9 Disassembly instructions!
Follow the 4.45 Removal instructions!
Prepare a new Adhesive Conductive Vibrator.
Follow the 4.45 Installation instructions!
Follow the 5.1 and 5.8 Reassembly instructions!
Adhesive Conductive Vibrator must be replaced when
the Vibrator is disassembled.
REMOVAL
Detach the Adhesive Conductive Vibrator and remove it with
a pair of Plastic Tweezers.
Scrap! Not to be reused!
Make sure all remaining adhesive residue have been
removed!
INSTALLATION
Attach a new Adhesive Conductive Vibrator by using a pair
of Plastic Tweezers as shown in picture and press it.
1290-1182 Rev 4
©
Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
27(72)