Philips DVP6688/93 Manual page 39

Video Setup Page
HDMI Video Setup
1_dvp6620-88_93_eng1_final813.in39 39 1_dvp6620-88_93_eng1_final813.in39 39
Setup Menu Options
(underlined options are the factory default settings)
Continued...
{ Resolution }
Notes:
– If a notifi cation message appears, confi rm your setting by
selecting { OK } in the menu and press OK to proceed.
– If the selected resolution is not supported by your HDMI/DVI
TV, a black screen will appear. In this case, wait for 5 seconds for
auto recovery or use the composite (yellow) video cable to
connect this unit and your TV. Turn on your TV to the correct
input channel for the composite video and adjust the resolution
setting to 480p/576p.
– Select a suitable video resolution
depending on the capability of the
connected TV/device to further
enhance the HDMI/DVI video output.
{ 480p }
Progressive output in 480 lines for
NTSC TV.
{ 576p }
Progressive output in 576 lines for PAL
TV.
{ 720p } - (if a HDMI TV is connected)
Progressive output upscale to 720 lines.
{ 1080i } - (if a HDMI TV is connected)
Interlaced output upscale to 1080 lines.
{ Auto }
The best supported resolution will
automatically be selected.
(continued)
39
2008-03-24 2:32:34 PM 2008-03-24 2:32:34 PM