Philips DVP6688/93 Manual page 35

Audio Setup Page
HDMI Audio Setup
Sound Mode
CD Upsampling
1_dvp6620-88_93_eng1_final813.in35 35 1_dvp6620-88_93_eng1_final813.in35 35
Setup Menu Options
(underlined options are the factory default settings)
This setting is only required if you are using the HDMI OUT
socket to connect your TV or other display device.
{ On }
{ Off }
Select the type of preset digital sound effect that can match the
disc's content or optimize the sound of the musical style you are
playing.
{ 3D }
{ Movie Mode }
{ Music Mode }
This feature enables you to convert the music CD to a
higher sampling rate using sophisticated digital signal
processing for better sound quality. If you have activated the
CD upsampling, this unit automatically switches to stereo
mode.
{ Off }
{ 88.2 kHz (X2) }
{ 176.4 kHz (X4) } – Convert the sampling rate of the CDs
Note: CD upsampling is only possible when playback the music
CD in stereo mode.
– Enable audio output through HDMI
connection.
– Disable HDMI audio output. In this case,
an alternative audio connection is
required from this unit to your TV.
– It provides a virtual surround sound
experience through the left and right
audio channels. Available options are:
{ Off }, { Living Room }, { Hall },
{ Arena } and { Church }.
– Movie sound effects. Available options
are: { Off }, { Sci-Fic }, { Action },
{ Drama } and { Concert } effect.
– Musical sound effects. Available options
are: { Off }, { Digital }, { Rock }, { Classic }
and { Jazz }.
– Disable CD-upsampling function.
– Convert the sampling rate of the CDs
to twice as high as the original rate.
to four times as high as the original rate.
(continued)
35
2008-03-24 2:32:33 PM 2008-03-24 2:32:33 PM