Electronic Programmer; Symbols Description - CDA DC930 Series Manual For Installation, Use And Maintenance

12

Electronic Programmer

The electronic programmer is a device that groups together the following
functions:
– 24 hour clock with illuminated display
– Timer (up to 23 hours and 59 minutes)
– Programme for automatic oven cooking
– Programme for semi-automatic oven cooking.
Description of the Buttons:
Symbols Description
Timer
Cooking time
End of cooking time
Manual position and cancellation of
the set cooking program
To increase the numbers on the
digital display
To decrease the numbers on the
digital display.
Note:
Select a function by the respective button and, in 5 seconds, set the required time with the
("one-hand" operation).
After a power cut the display resets to zero and cancels the set programs.
(Lower Main Oven only)
A
U
T
O
Fig. 6
Description of the Illuminated Symbols:
Symbols Description
AUTO
Programmer in automatic position
but not programmed.
flashing
AUTO
Programmer in automatic position
with program set.
always lit
Automatic cooking taking place.
Timer in operation
Program error.
and
(The time of day lies between the
AUTO
calculated cooking start and end
flashing
time).
Fig. 7
/ buttons