Table of Contents
Advertisement
Video options
1
INFO.
Press
» The video options menu is displayed.
2
Press the Navigation buttons and OK to
select and change:
•
[Title]: Select a specific title.
•
[Chapter]: Select a specific chapter.
•
[Track]: Select a specific track (for
VCD/SVCD only).
•
[Audio]: Select audio language for
video.
•
[Subtitle]: Select subtitle language for
video.
•
[Angle]: Select video scenes recorded
in different camera angels.
•
[TT Time]: Skip to a specific part of
the video by entering the title time.
•
[Ch Time]: Skip to a specific part of
the video by entering the chapter time.
•
[Disc Time]: Skip to a specific part of
the video by entering the disc time (for
VCD/SVCD only).
•
[Track Time]: Skip to a specific part
of the video by entering the track time
(for VCD/SVCD only).
•
[Repeat AB]: Mark two points within a
chapter or track to repeat play, or turn
off the repeat mode.
•
[Preview]: Select a content preview
for disc.
•
[Repeat]: Select a repeat mode.
•
[Time Disp.]: Select the information of
time display.
Picture options
1
INFO to access picture preview
Press
mode.
» 12 thumbnail pictures are displayed.
2
Press
/
to go to previous or next
preview page.
3
Press the Navigation buttons and OK to
select a picture.
EasyLink
The home theatre supports Philips EasyLink, which
uses the HDMI-CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices that
are connected through HDMI can be controlled
by a single remote control.
Philips does not guarantee 100% interoperability
with all HDMI-CEC devices.
What you need
•
HDMI-CEC compliant devices.
•
An HDMI connection between the
connected devices.
Switch on
1
On the TV and other connected devices,
turn on the HDMI-CEC operations. For
details, see the manual of the TV or other
devices.
2
SETUP.
Press
3
Select [General Setup], and then press OK.
4
Select [EasyLink Setup] > [EasyLink], and
then press OK.
5
Select [On], and then press OK.
Control devices
Control the home theatre and the other
connected HDMI-CEC compliant devices with a
single remote control.
One-touch play
If you enable One-touch play, the TV
automatically switches to the correct channel
when you play a disc in your home theatre.
One-touch standby
When you press and hold
remote control, the home theatre and all the
connected HDMI-CEC devices (that support
one-touch standby) switch to the standby
mode.
If one-touch standby is enabled on your home
theatre, you can switch to standby with the
remote control of the TV or other HDMI-CEC
devices.
(Standby) on the
EN
11
Advertisement
Table of Contents
