Sound
No sound from home theatre speakers.
•
Connect the audio cable from your home
theatre to your TV or other devices.
•
If the connected device is HDMI-CEC
compliant, set up the audio for the
connected device (see 'Play audio from
home theatre' on page 12).
•
On your home theatre, press SOURCE
repeatedly to select the correct audio input.
Distorted sound or echo.
•
If you play audio from the TV through the
home theatre, make sure that the TV is
muted.
Audio and video are not synchronised.
•
1) Press and hold AUDIO SYNC. 2) Press
+/- within five seconds to synchronise the
audio with the video.
Play
Cannot play a disc.
•
Clean the disc.
•
Make sure that the home theatre supports
the type of disc (see 'Media formats' on
page 12).
•
Make sure that the home theatre supports
the region code of the disc (see 'Region
codes' on page 12).
•
If the disc is a DVD±RW or DVD±R disc,
make sure that it is finalised.
Cannot play a DivX file.
•
Make sure that the DivX file is encoded
according to the 'Home Theatre Profile'
with the DivX encoder.
•
Make sure that the DivX file is complete.
DivX subtitles do not display correctly.
•
Make sure that the subtitle file name is the
same as the movie file name (see 'Subtitles'
on page 10).
•
Select the correct character set: 1) Press
SETUP. 2) Select [Preference Setup] >
[DivX Subtitle]. 3) Select the supported
character set. 4) Press OK.
Cannot read the contents of a USB storage
device.
•
Make sure that the format of the USB
storage device is compatible with the home
theatre.
•
Make sure that the file system on the USB
storage device is supported by the home
theatre.
EN
14
'No entry' or 'x' sign appears on the TV.
•
The operation is not possible.
EasyLink does not work.
•
Make sure that the home theatre is
connected to a Philips brand EasyLink TV,
and the EasyLink option is on (see 'EasyLink'
on page 11).
When you switch on the TV, the home theatre
automatically switches on.
•
This behavior is normal when you are using
Philips EasyLink (HDMI-CEC). To make the
home theatre work independently, switch
off EasyLink.