English
Contents
1
2
ques............................................................ 2
3
4
5
6
7
8
9
10
11
Fuel........................................................... 23
12
Fueling...................................................... 24
13
14
15
16
17
Spark Plug................................................ 29
18
19
20
21
22
Main Parts.................................................33
23
24
25
Disposal.................................................... 35
26
1
Guide to Using this Manual
1.1
Pictograms
Pictograms that appear on the machine are
explained in this Instruction Manual.
Depending on the machine and equipment ver-
sion, the following pictograms may appear on the
machine.
Fuel tank; fuel mixture of gasoline
and engine oil
Actuate decompression valve
Actuate manual fuel pump
Water connection, shut-off cock
Tensioning nut for belt
2
Pull starter grip
1.2
Symbols in text
WARNING
Warning where there is a risk of an accident or
personal injury or serious damage to property.
NOTICE
Caution where there is a risk of damaging the
machine or its individual components.
1.3
Engineering improvements
STIHL's philosophy is to continually improve all
of its products. For this reason we may modify
the design, engineering and appearance of our
products periodically.
Therefore, some changes, modifications and
improvements may not be covered in this man-
ual.
2
Safety Precautions and
Working Techniques
Special safety precautions must be
taken when working with the cut-off
machine, due to the very high rota-
tional speed of the abrasive wheel.
It is important you read and under-
stand the User Manual before com-
missioning and keep it in a safe place
for future reference. Non-observance
of the safety precautions may result
in serious or even fatal injury.
Observe all applicable local safety regulations,
e.g. by trade organizations, social insurance
institutions, labor safety authorities etc.
As for employers within the European Commun-
ity, the provision 2009/104/EC is binding - Safety
and health protection with the use of machines
and devices by employees at work.
If you have never used a power tool before: have
your STIHL dealer or other specialist show you
how to operate the machine - or attend one of
the special training courses.
Minors should never be allowed to use the
machine - except for apprentices over the age of
16 when working under supervision.
0458-370-8321-C