The Local User Interface - AGFA Crystal Imager User Manual

56 | Crystal Imager | Introduction

The local user interface

The printer interfaces with the user via the following controls:
• Power/Reset button;
• a keypad and a display;
• a status indicator LED;
• audio signals.
Power/Reset button
1.
Display
2.
Keypad
3.
Status indicator LED
4.
Film input trays
5.
Film output tray
6.
Figure 5: Overview of user interface controls
Topics:
• Messages
• The status indicator LED
• The control buttons
• Rear panel
• Audio signals
• The keypad
3831B EN 20210601 1655
WARNING:
Never try to open the printer during printing. Always follow the
instructions on the display!