Pre-Operation Check Points; Pre-Launch Checks; Steering System Checks; Remote Control Lever Checks - Yamaha AR195 2019 Owner's/Operator's Manual

Pre-operation check points

Pre-launch checks

Perform the pre-launch checks in the "Pre-
operation checklist" while the boat is on land.

Steering system checks

Make sure the steering wheel is not loose.
There should not be any free play, either in-
and-out or in rotation. Turn the steering wheel
fully to the right and left to make sure opera-
tion is smooth and unrestricted throughout
the whole range.
Make sure the jet thrust nozzle changes di-
rections as the steering wheel is turned. The
jet thrust nozzle should point to starboard
(right) when the wheel is turned to the right.
The jet thrust nozzle should point to port (left)
when the wheel is turned to the left. There
should not be free play between the steering
wheel and the jet thrust nozzle. In addition,
check that the direction of the articulating
keel changes according to the movement of
the jet thrust nozzle.
Pre-operation checks
1
1 Jet thrust nozzle
2 Articulating keel

Remote control lever checks

WARNING
Do not touch the shift gate while the re-
mote control lever is being operated, oth-
erwise, you could be pinched.
Operate the remote control lever several
times to make sure that operation is smooth
throughout the whole range.
F
2
5
3
6
7
8
1 Neutral position
2 TDE position
3 Forward position
4 Reverse position
5 Shift
6 Fully closed
7 Throttle
8 Fully open
2
N
1
R
5
4
7
6
8
87