Samsung QN75QN8 B Series User Manual page 6

– If your access point or modem has a standby mode
button, use it to disconnect your home network from
the Internet when it is not in use.
Use strong passwords for all your Internet accounts
(Netflix, Facebook, etc.).
If any unexpected messages appear on your TV screen
requesting permission to link a device or enable a remote
session, do NOT accept.
Do not visit suspicious web sites and do not install any
suspicious programs. We recommend that users install
only those authorized apps provided by Samsung through
Samsung Smart Hub.
01 Connecting the TV to
the One Connect Box
For more information about how to connect via the One
Connect Box, refer to Quick Setup Guide.
Do not use the One Connect Box in the
upside-down or upright position.
Take care not to subject the cable to any of
the actions below. The One Connect Cable
contains a power circuit.
Bending Twisting Pulling
Using the One Connect cable holder
You can use the One Connect cable holder to tidy up the
cables while installing the wall mount.
Pressing Electric
on shock
02 Initial Setup
When you turn on your TV for the first time, it immediately
starts the Initial Setup. Follow the instructions displayed on
the screen and configure the TV's basic settings to suit your
viewing environment.
Using the TV Controller
You can turn on the TV with the TV Controller button at
the bottom of the TV, and then use the Control menu. The
Control menu appears when the TV Controller button is
pressed while the TV is On.
The screen may dim if the protective film on the
SAMSUNG logo or the bottom of the TV is not detached.
Please remove the protective film.
Control menu
TV Controller button / Remote control sensor
Setting the sound sensor
You can turn on or off the sound sensor by
using its switch at the bottom of the TV.
With the TV on, you can push the switch to
the left to turn on the sound sensor or to
the right to turn off it.
See the pop-up window on the TV to check whether the
sound sensor is turned on or off.
The position and shape of the sound sensor may differ
depending on the model.
During analysis using data from the sound sensor, the
data is not saved.