Connect to Power
WARNING!
•
Risk of product damage! Make sure that the
power supply voltage corresponds to the
voltage printed on the back or the underside of
the product.
•
Risk of electric shock! When you unplug the
power cord, always pull the plug from the
socket. Never pull the cord.
•
Before connecting the AC power cord, ensure
you have completed all other connections.
Connect the mains cable to the AC
Socket of the unit and then into a mains
socket.
or
•
Power cord quantity and plug type
vary by regions.
1
Pairing with Subwoofer
(FW1) via proprietary RF link
FB1 SoundBar
FB1 soundbar can pair with FW1 (not
supplied) Play-Fi wireless subwoofer.
SoundBar
Automatic pairing
1
Switch FW1 subwoofer source to
Play-fi/RF link source.
(Green) Solid
2
14 EN
2
2
Both soundbar and subwoofer are on.
The soundbar will discover and pair
with the subwoofer in pairing mode.
» If pairing succeeds, soundbar
display shows "PAIRED".
» If pairing fails, soundbar display
shows "CHECK SUBWOOFER".
Manual pairing
2
(Green) Fast blink
If pairing fails, To perform manual pairing
of soundbar and subwoofer:
1
Unplug the subwoofer from the
power outlet and power it up again.
2
Goto soundbar settings menu.
» Press
Then press
the subwoofer pairing mode.
4
3
3
The soundbar will discover and pair
with the subwoofer in pairing mode.
6
Connect to Wi-Fi
(Wireless Operation)
(For iOS and Android version)
By connecting this unit and mobile phones,
tablets (such as iPad, iPhone, iPod touch,
Android phones, etc.) to the same Wi-Fi
network, you can then use the Philips Sound
app powered by DTS Play-fi to control the
soundbar to listen to audio files.
> select "SUB PAIR" >
(Enter) to confirm
FB1 SoundBar