Connect To Power; Pair Up With The Subwoofer - Philips 7000 Series User Manual

a. Use 3.5mm-RCA audio cable
•
Use a RCA to 3.5mm audio cable
to connect the TV's audio output
sockets to the AUX socket
on the soundbar.

Connect to power

•
Before connecting the AC power
cord, ensure you have completed all
other connections.
•
Risk of product damage! Ensure that
the power supply voltage corresponds
to the voltage printed on the back or
the underside of the unit.
1
Connect the mains cable to the AC~
socket of the soundbar and then into
a mains socket.
2
Connect the mains cable to the AC~
socket of the subwoofer and then
into a mains socket.
1
* Power cord quantity and plug type
2
vary by regions.
3
AUX
TV
L
R
Audio out
AC~
AC~

Pair up with the subwoofer

Tips
•
The subwoofer should be within 6 m of the
soundbar in an open area.
Automatic pairing
Plug the soundbar and the subwoofer
into the mains sockets and then press
on the unit or remote control to switch
the unit to ON mode. The subwoofer and
soundbar will automatically pair.
» Determine the status based on
the wireless subwoofer indicator.
LED State Status
Fast blink Subwoofer in pairing mode
Solid Connected / Pairing successful
Slow blink Pairing failed
Tips
•
Do not press Pair button on the rear of the
subwoofer, except for manual pairing.
Manual pairing
If no audio from the wireless subwoofer
can be heard, manually pair up the
subwoofer.
1
Unplug both the subwoofer from
the mains sockets again, then plug
them in again after 3 minutes.
EN 13