Table of Contents
Advertisement
Others
Specification
I Power requirement during operation
45W
I Power requirement at standby
2.7W or below (Eco mode: off)
0.8W or below (Eco mode: on)
I Power supply
120V AC, 60 Hz
I Mass
4.2kg
I External dimension
Width 430 x Height 78 x Depth 325mm
I Incoming channels
TV: 2-69CH, Cable:1-125CH
I Antenna input/output terminal
VHF/UHF: 75Ω, F Connector
I Signal system
Standard NTSC Color TV system
I Laser
Semiconductor laser, Wavelength: 650nm/780nm
I Format
DVD-VR format
DVD-Video format
I Image recording system
MPEG2
I Sound recording system
Dolby Digital M1, M2, Linear PCM
172
I VIDEO input
1.0Vp-p (75Ω), Sync signal negative,
Pin jack x 2 systems, 2 at rear, 1 in front
I VIDEO output
1.0Vp-p (75Ω), Sync signal negative,
Pin jack x 2 systems, 2 at rear
I S-VIDEO input
(Y) 1.0Vp-p (75Ω), Sync signal negative,
Mini DIN4 Pin x 3 systems
(C) 0.286Vp-p (75Ω), 2 at rear, 1 in front
I S-VIDEO output
(Y) 1.0Vp-p (75Ω), Sync signal negative,
Mini DIN4 Pin x 2 systems
(C) 0.286Vp-p (75Ω), 2 at rear
I COMPONENT output (Y, P
Y output (green), 1.0Vp-p (75Ω),
Sync signal negative, Pin jack x 1 system
P
, P
output (blue, red), 0.7Vp-p (75Ω),
B
R
Pin jack x 1 system each
I AUDIO input
2.0V (rms), 50kΩ or below, pin jack
(L, R) x 3 systems
2 at rear, 1 in front
I AUDIO output
2.0V (rms), 200Ω or above, pin jack
(L, R) x 2 systems
2 at rear
I DIGITAL AUDIO OUTPUT
BITSTREAM/PCM (OPTICAL terminal)
Optical connector x 1 system
I DIGITAL AUDIO OUTPUT
BITSTREAM/PCM (COAXIAL terminal)
0.5Vp-p (75Ω), pin jack x 1 system
I CHANNEL CHANGE IR jack
This is for connection of the supplied IR control cable
only.
I DV input
4-pin x 1 in front
, P
)
B
R
Hide quick links:
Advertisement
Chapters
Table of Contents
