Connecting To Optional Equipment - Toshiba SD-330ESB Owner's Manual

Connections

Connecting to Optional Equipment

You can enjoy high quality dynamic sounds by connecting the DVD video player
to optional audio equipment.
• For connection to your TV, see "Connecting to a TV"
.
18 19
• For details of output sound, see
• This section uses the following reference marks.
: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow
Notes
• DO NOT connect the BITSTREAM/PCM AUDIO OUT jack
of the DVD video player to the AC-3 RF input of a Dolby
Digital Receiver. This input on your A/V Receiver is
reserved for Laserdisc use only and is incompatible with
the BITSTREAM/PCM AUDIO OUT jack of the DVD video
player.
• Connect the BITSTREAM/PCM AUDIO OUT jack of the
DVD video player to the "OPTICAL" or "COAXIAL" input of
a Receiver or Processor.
• Refer to the owner's manual of the connected equipment
as well.
• When you connect the DVD video player to other
equipment, be sure to turn off the power and unplug all of
the equipment from the wall outlet before making any
connections.
• The output sound of the DVD video player has a wide
dynamic range. Be sure to adjust the receiver's volume to
a moderate listening level. Otherwise, the speakers may
be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the
DVD video player's power cord. If you leave the amplifier
power on, the speakers may be damaged.
20
.
43
Warning
• When you are connecting (via the BITSTREAM/PCM
AUDIO OUT jack) an AV decoder that does not have
Dolby Digital, Digital Theater Systems (DTS) or MPEG2
decoding function, be sure to set "Audio Out Select" to
"PCM" from the on-screen displays
high volume sound may damage your hearing as well as
the speakers.
• When playing DTS-encoded discs (audio CDs),
excessive noise may be output from the analog stereo
jacks. To avoid possible damage to the audio system,
you should take proper precautions when the ANALOG
AUDIO OUT (L/R) jacks of the DVD video player are
connected to an amplification system. To enjoy DTS
Digital Surround™ playback, an external 5.1 channel
DTS Digital Surround™ decoder system must be
connected to the BITSTREAM/PCM AUDIO OUT jack of
the DVD video player.
. Otherwise,
58 61