Connecting To A Tv (Using The Phono Type Jacks) - Toshiba SD-330ESB Owner's Manual

Connecting to a TV (Using the phono type jacks)

Select the connection type depending on the TV. (TV equipped with an S video input / Normal TV)
TV equipped with
an S video input
To audio To
input S video
input
Normal TV
To audio To video
input input
(yellow)
• Make the following setting.
On-screen
See "Customizing the Function Settings" beginning from
display
TV
"Video Out Select"
TV equipped with an
S video input
Normal TV
Notes
• Refer to the owner's manual of the connected equipment as well.
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the
DVD video player away from the tuner and radio.
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD video player's power cord. If you leave the amplifier power
on, the speakers may be damaged.
• If your television set has one audio input, connect the DVD video player to a Y cable adapter (not supplied) and then connect
to your TV.
VIDEO Y P
B
R L COAXIAL
S
ANALOG ANALOG
To S VIDEO OUT
S video cable
Audio cable
VIDEO Y P B
R L COAXIAL
S
ANALOG ANALOG
To VIDEO OUT
(yellow)
Audio/video cable
"Audio Out Select"
60
"Video"
or
"S Video"
No need to set.
P
R
VIDEO OUT
AUDIO OUT
OPTICAL
BITSTREAM/PCM
DIGITAL
To ANALOG AUDIO OUT
(R:red, L:white)
P R
VIDEO OUT
AUDIO OUT
OPTICAL
BITSTREAM/PCM
DIGITAL
To ANALOG AUDIO OUT
(R:red, L:white)
.
58
61
"Analog 2ch"
"Analog 2ch"
Signal flow
AV
To wall outlet
Signal flow
AV
To wall outlet
19