Connecting To Atv; Connecting To A Tv (Using The Scart Socket); Connecting To A Tv (Using The Phono Type Jacks) - Toshiba SD-469EKE Owner's Manual

Connecting to a TV
Connect the DVD video player to your TV.

Connecting to a TV (Using the SCART socket)

Normal TV
To SCART input
SCART cable
(not supplied)

Connecting to a TV (Using the phono type jacks)

Normal TV
To video To audio
input input
(yellow)
Audio/Video cables (supplied)
Notes
• Refer to the owner's manual of the connected TV as well.
• When you connect the DVD video player to your TV, be sure to turn off the
power and unplug both units from the wall outlet before making any connections.
• If your television set has one audio input, connect the left and right audio outputs
of the DVD video player to a Y cable adapter (not supplied) and then connect to
your TV.
• Connect the DVD video player directly to your TV. If you connect the DVD video
player to a VCR, TV/VCR combination or video selector, the playback picture
may be distorted as DVD video discs are copy protected.
• Analogue audio out will not have sound if DTS playback is selected.
• Make the following setting.
On-screen display
Select:
Composite
Component
"Video Output" P-Scan
RGB
HDMI
To 2ch To VIDEO
AUDIO OUT
OUT (yellow)
(R: red,
L:white)
To wall outlet
Page
31
To AV
To wall outlet
• Make the following setting.
On-screen display Select:
Off
"Digital Output"
PCM
Bitstream
Composite
Component
"Video Output"
P-Scan
RGB
HDMI
Page
32
31
21