Electrical System; Adjusting The Headlight Beam - Yamaha FZ 25 2021 Supplementary Service Manual

ELECTRICAL SYSTEM

ADJUSTING THE HEADLIGHT BEAM

The following procedure applies to the adjust-
ment of the headlight beam.
Adjust the headlight beam by rotating the
headlight beam adjusting screw with the help
of philip screwdriver "1" in direction "a" or "b"
from right side of headlight.
Direction "a"
Headlight beam is raised.
Direction "b"
Headlight beam is lowered.
(b)
TIP
o Valve clearance adjustment should be made on a cold engine, at room temperature.
● Height at low beam line "a" : 67.6 cm
● Height at low beam line "b" : 47.6 cm
At Low Beam: 67.6 cm height
75 kg
Single rider
Weight
(a)
10 meter
ELECTRICAL SYSTEM
a
b
3-6
CHK
ADJ