Toshiba B-EV4T SERIES Owner's Manual page 21

2. PRINTER SETUP
2.7 Loading the Media
(Cont.)
CAUTION!
To separate the printed
media from the media roll in
batch mode, be sure to tear
off the media at the Media
Outlet or cut the media past
the Strip Plate. If you tear
off the media at the Print
Head by mistake, be sure to
feed one label (10 mm or
more) with the FEED Button
prior to a next issue. Failure
to do this may cause a paper
jam.
Close the Top Cover gently and push down the arrow-indicating
9.
portions until they click.
10. Press the [FEED] button to check for a proper media feed.
There are three issue modes available for this printer.
Batch mode:
In the batch mode, the media is continuously printed and fed until the
number of media specified in the issue command has been printed.
E2-10
ENGLISH VERSION EO1-33087
2.7 Loading the Media
FEED Button