Honeywell DT92 Manual page 3

ORDERING SPECIFICATION
Model Description
Wireless digital room thermostat
DT92A1004
(System pack, comprising DT92A room thermostat + BDR91 Relay Box)
Wireless digital room thermostat with ECO energy saving feature
DT92E1000
(System pack, comprising DT92E room thermostat + BDR91 Relay Box)
Note: the room thermostat and relay box in each system pack are pre-bound (linked together) at the factory. This
means they will recognize and communicate with each other as soon as they are powered up. The complete device
is therefore ready for immediate installation.
CONTROLS / DISPLAY LAYOUT
frost protect indicator
temperature display
setpoint indicator
fault indicator
battery low warning
RF communications
Room Thermostat
DT92A
heating demand indicator
off/standby indicator
indicator
DT92 WIRELESS DIGITAL ROOM THERMOSTAT
Room Thermostat
DT92E
ECO mode active
ECO mode countdown timer
Relay Box
BDR91
3
Literature
Multi-lingual
Multi-lingual
ECO countdown indicator
setpoint change buttons
ECO button
off/standby button
green LED, indicates
• relay on/off status
• transmission test
push button
red LED, indicates
• status in binding or reset modes
• loss of RF communications
EN0H 8580 UK07 R1 09/15