Honeywell DT92E Quick Start Manual

WIRELESS DIGIT L THERMOST T
DT92E
FEATURES
Energy saving TPI control
ECO button for energy saving mode
Countdown display of time remaining in
ECO energy saving mode
30 metres wireless range
Two way wireless communications
Signal strength indicator
Slim modern design
Extra large LCD with easy to read text
Volt free connections
Simple user operation
Room temperature inquiry
Heating 'ON' indicator
5 to 35°C setpoint range
Battery powered thermostat
(with low battery indication)
Two year battery life
'OFF' setting with adjustable OFF setpoint
ctual space temperature display
Mains or low voltage switching
© Honeywell Control Products and Systems
APPLICATION
The DT92E wireless digital room thermostat has been designed
to provide automatic temperature control of gas or oil fired boiler
systems, underfloor heating, electric heating and zoning systems.
Energy efficiency is addressed by state of the art control
performance qualifying it as a Load Compensator.
The DT92E has an ECO button energy saving feature which gives
timed setback or boosts temperatures to reduce energy demand.
This is a TPI (Time Proportional & Integral) control product as
defined in the Building Regulations, which make boilers operate
more efficiently and provides close, accurate control. This is
continually improved by a self learning adaptive capability.
The 'OFF' setting can be used for frost or hypothermia protection,
assuming the system time control is also switched on.
'Installer Mode' allows control to be matched to the system and
user requirements, adapting minimum on or off times, set point
controls etc.
The volt free connections are ideal for use with combination
boilers or heating zones.