Kenwood KMM-BT332U Instruction Manual page 34

Digital media receiver
Hide thumbs Also See for KMM-BT332U:
Table of Contents

Advertisement

Available languages

Available languages

Installation/Connection
Part list for installation
(A) Faceplate (×1)
(C) Mounting sleeve (×1)
(E) Extraction key (×2)
Basic procedure
1
Remove the key from the ignition switch, then disconnect the
terminal of the car battery.
2
Connect the wires properly.
See "Wiring connection" on page 30.
3
Install the unit to your car.
See the following "Installing the unit (in-dash mounting)".
4
Connect the
terminal of the car battery.
5
Press B SRC to turn on the power.
6
Detach the faceplate and reset the unit within 5 seconds. (Page 3)
28
ENGLISH
(B) Trim plate (×1)
(D) Wiring harness (×1)
Installing the unit (in-dash mounting)
1
2
Hook on the top side
Orientate the trim
plate as illustrated
before fitting.
Do the required wiring.
(Page 30)
Dashboard of your car
Bend the appropriate tabs to hold the sleeve
firmly in place.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kmm-bt38

Table of Contents