Final Gear Oil - Yamaha Majesty YP250 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1
1
2
3
1. Reset button
4
To reset the oil change indicator
light
5
1. Turn the key to "ON".
2. Hold the reset button pushed for
6
two to five seconds.
3. Release the reset button, and
7
the oil change indicator light will
go off.
8
9
NOTE:
If the engine oil is changed before the
oil change indicator light comes on
(i.e. before the periodic oil change
interval has been reached), the indi-
cator light must be reset after the oil
change for the next periodic oil
change to be indicated at the correct
time. To reset the oil change indicator
light before the periodic oil change
interval has been reached, follow the
above procedure, but note that the
indicator light will come on for 1.4
seconds after releasing the reset but-
ton, otherwise repeat the procedure.
6-17

Final gear oil

The final gear case must be checked
for oil leakage before each ride. If
any leakage is found,
Yamaha dealer check and repair the
scooter. In addition, the final gear oil
must be changed as follows at the
intervals specified in the periodic
maintenance and lubrication chart.
1. Start the engine, warm it up by
riding the scooter for several
minutes, and then stop the
engine.
2. Place the scooter on the center-
stand.
NOTE:
Make sure that the scooter is posi-
tioned straight up when checking the
oil level. A slight tilt to the side can
result in a false reading.
3. Place an oil pan under the final
gear case to collect the used oil.
EAU03469
have a