Table of Contents
Advertisement
Assembly – Single SIM
Your device only supports nano SIM cards. Single SIM devices allow you to use one
SIM card and a memory card.
The nano SIM card and the memory card have separate slots. Make sure you don't
confuse the two.
For information on how to check if your device is Single SIM or Dual SIM, see
Finding the IMEI number(s) of your device on page 14.
To prevent data loss, be sure to turn off your device or unmount the memory card before
you drag out the holder to remove the nano SIM card or memory card from the device.
To insert a nano SIM card and a memory card
Do not cut your SIM card, as this may damage your device.
1
Drag out the SIM card tray.
2
Place the memory card in the correct orientation into the memory card slot,
as shown in the illustration.
3
Place the SIM card securely in the SIM card tray, as shown in the illustration.
4
Gently push the tray back into the slot until it fits into place.
Assembly – Dual SIM
Your device only supports nano SIM cards. Dual SIM devices support the use of one
or two nano SIM cards and a memory card.
Dual SIM devices are not available in all markets or from all operators.
Downloaded from
ManualsNet.com
1. Charging/Notification light
2. Headset jack
3. Proximity sensor
4. Ear speaker
5. Front camera
6. Secondary microphone
7. Volume/Zoom key
8. Power key
9. Loudspeaker
This is an internet version of this publication. © Print only for private use.
search engine
10. Main microphone
11. Charger/USB Type-C™ cable port
12. Wi-Fi/GPS/Bluetooth® antenna area
13. Flash LED
14. Main camera lens
15. NFC™ detection area
16. Nano SIM/memory card slot
17. Fingerprint sensor
18. Main antenna area
8
Advertisement
Table of Contents
