4> Assembly; Assemble Basic Components - York D835 Manual

<4>
Assembly

Assemble Basic Components

Support Structures
1
assemble support structures
Completely assemble the support structures. Put
all support structures in place. See
GLOBAL
2016-06-14
page 24.
INDUSTRIES, INC.
i
IMPORTANT NOTE: The conveyor body is
normally shipped pre-assembled but can be
shipped knocked down. The unit is made to
self-align as it is put together. When constructing
the main components, check for alignment using
a string along side the conveyor to check section
connections are fl ush (especially the bottoms). Do
this so paddles brush less against the side and
vibration is lessened.
i
IMPORTANT NOTE: Make certain component
sides are square and parallel to each other (during
assembly and after assembly).
27
10230011
Drag Conveyors