Parts Identification - York D835 Manual

Parts Identification

NOTE: The conveyor shown on
hand drive. Right hand drive conveyors are standard.
INTERMEDIATE SECTION
(5' - 10' [1524 mm - 3048 mm]
BOTTOM
HEAD
SPLICE
DRIVE SHAFT
GLOBAL
2016-06-14
Specifications
this page has a right
INLET
SHIM
INDUSTRIES, INC.
"cut-away" RETURN IDLER detail
shown on
ROPE WHEEL
(or hand wheel)
INTERMEDIATE
DISCHARGE HOPPER
(use for rack and pinion gates
and hand slide gates.)
NOTE: Conveyors depicted in
always resemble the conveyor you are assembling!
20
TAIL
BOTTOM SPLICE
the next page
IN-LINE
RACK AND PINION GATE
this manual do not
Drag Conveyors
10230011