Engine; Install Cowling; Filling Fuel For Built-In Tank - Yamaha F2.5A Owner's Manual

3. Check the oil level using the oil level
check window to be sure the level falls
between the upper and lower marks. Fill
with oil if it is below the lower mark, or
drain to the specified level if it is above
the upper mark.
1
1. Oil level check window
2. Upper level mark
3. Lower level mark
EMU27153

Engine

Check the engine and engine mounting.
G
Look for loose or damaged fasteners.
G
Check the propeller for damage.
G
Check for engine oil leaks.
G
EMU36941

Install cowling

1. Be sure that all cowling lock levers are re-
leased.
2. Be sure that the rubber seal is seated all
the way around the engine.
3. Place the cowling on top of the seal.
4. Check to be sure it fits properly in the rub-
ber seal.
5. Move the levers to lock the cowling as
shown. NOTICE: If the top cowling is
not installed correctly, water spray un-
der the top cowling can damage the
engine, or the top cowling can blow off
at high speeds.
ZMU02346
[ECM01991]
2
3
After installing, check the fitting of the top
cowling by pushing it with both hands. If the
top cowling is loose, have it repaired by your
Yamaha dealer.
EMU37682

Filling fuel for built-in tank

EWM01950
WARNING
Be sure the outboard motor is securely
fastened to the transom or a stable stand.
Operation
ZMU06128
ZMU06130
24