Download Print this page

FireplaceXtrordinair 96100873 Installation

4237 fireback

Advertisement

Quick Links

Compatibility
4237 Fireplace (FIREBACKS ARE REQUIRED BEFORE OPERATING THE 4237 FIREPLACE)
Packing List
Rear Fireback (ceramic firebacks have 2 pieces - note orientation below)
NOTE: The rear fireback of the Herringbone and the Stacked Tan kits have an arrow cast into the back. To
ensure proper brick alignment make sure the arrow is pointing upward. The rear panel of the Handmade Brick
liner can be installed with either edge facing up.
Left and Right Side Fireback (note orientation below)
Handmade Brick
Left, Right, and Front Floor Fireback
Handmade Brick, Herringbone and Stacked Tan Brick are shown below (note orientation).
Black Enamel is slightly different (see page 4)
Page 1 of 4
4237 Fireback Installation
96100873 Brick, 96100874 Herringbone, 96100875 Enamel Black,
96100877 Stacked Tan Brick
Handmade Herringbone
Each side
fireback has a
small notch at
the front of the
upper edge
17601933 - 9/14/17
Stacked Tan Brick
Travis Industries, Inc.

Advertisement

loading

Summary of Contents for FireplaceXtrordinair 96100873

  • Page 1 4237 Fireback Installation 96100873 Brick, 96100874 Herringbone, 96100875 Enamel Black, 96100877 Stacked Tan Brick Compatibility  4237 Fireplace (FIREBACKS ARE REQUIRED BEFORE OPERATING THE 4237 FIREPLACE) Packing List  Rear Fireback (ceramic firebacks have 2 pieces - note orientation below) NOTE: The rear fireback of the Herringbone and the Stacked Tan kits have an arrow cast into the back.
  • Page 2 4237 Fireback Installation 96100873 Brick, 96100874 Herringbone, 96100875 Enamel Black, 96100877 Stacked Tan Brick Installation WARNING Turn off gas to the appliance and make sure it is cool prior to conducting service. The firebacks should be installed while finalizing the installation (before installing the logs).
  • Page 3 4237 Fireback Installation 96100873 Brick, 96100874 Herringbone, 96100875 Enamel Black, 96100877 Stacked Tan Brick Ceramic Firebacks: Place the lower rear fireback in place. While holding it in place, place the upper, rear fireback on top of it (continue to hold both in place).
  • Page 4 4237 Fireback Installation 96100873 Brick, 96100874 Herringbone, 96100875 Enamel Black, 96100877 Stacked Tan Brick Installation (continued) Place one side fireback in place. Secure with the two fireback clips. Repeat these steps for the remaining side fireback. Place the floor firebacks in place.

This manual is also suitable for:

961008749610087596100877