Husqvarna BMS 150 Operator's Manual page 20

2. Fold the rotating cable arm.
3. Remove the 2 knobs.
4. Fold the retractable cable reel.
5. Install the 2 knobs.
20
6. Remove the 2 rear screws of the footrest plate.
7. Fold the footrest plate.
8. Install the 2 screws.
9. Remove the tool holder. Refer to
holder on page 16 .
Disposal of the product
• Obey the local recycling requirements and applicable
regulations.
• When the product no longer is used, send it to
a Husqvarna dealer or discard it at a recycling
location.
To replace the tool
1817 - 002 - 13.04.2022