Husqvarna BS 75 Operator's Manual page 16

4. Remove the 7 screws.
5. Remove central bolt to release bearing hub.
6. Remove the 5 nuts.
7. Remove the vibration dampening plate and the 5
vibration damping units.
8. Install in the opposite sequence.
To replace the vibration damping units BS 110
1. Remove the blade. Refer to
page 17 .
WARNING:
The blades are very sharp.
2. Remove the weights. Refer to
the weights BS 110 on page 10 .
16
To replace the blade on
Use protective gloves.
To remove and install
3. Remove the 6 screws and the bottom cover.
4. Remove the 5 nuts and the cutting head.
5. Remove the 5 washers (A).
C
A
6. Remove the 5 screws (B) and the 5 vibration
damping units (C).
7. Install in the opposite sequence.
B
1804 - 001 - 06.05.2022