Table of Contents
Advertisement
News Bulletin with Timeout Setting
News Bulletin with Timeout Setting
It switches automatically when a news bulletin starts even if the
It switches automatically when a news bulletin starts even if the
radio isn't being listened to. Also, the time interval when
radio isn't being listened to. Also, the time interval when
interrupt is prohibited can be set.
interrupt is prohibited can be set.
Display and Setting
Display and Setting
"News :OFF"
"News :OFF"
"News :00min"
"News :00min"
"News :90min"
"News :90min"
When "News 00min" — "News 90min" is set, the News Bulletin
When "News 00min" — "News 90min" is set, the News Bulletin
Interrupt function is ON.
Interrupt function is ON.
When the news bulletin starts, "News" is displayed, and it
When the news bulletin starts, "News" is displayed, and it
switches to the news bulletin.
switches to the news bulletin.
• If you choose the "20min" setting, further news bulletins will not
• If you choose the "20min" setting, further news bulletins will not
be received for 20 minutes once the first news bulletin is received.
be received for 20 minutes once the first news bulletin is received.
• The news bulletin volume is the same level that was set for traffic
• The news bulletin volume is the same level that was set for traffic
information (page 25).
information (page 25).
• This function is only available if the desired station sends PTY-code
• This function is only available if the desired station sends PTY-code
for news bulletin or belongs to <Enhanced Other Network>-
for news bulletin or belongs to <Enhanced Other Network>-
Network sending PTY-code for news bulletin.
Network sending PTY-code for news bulletin.
• When the News Bulletin Interrupt function is ON, it switches to an
• When the News Bulletin Interrupt function is ON, it switches to an
FM station.
FM station.
Local Seek <In Tuner mode>
Local Seek <In Tuner mode>
Only stations whose reception is good are searched for in auto
Only stations whose reception is good are searched for in auto
seek tuning.
seek tuning.
Display
Display
Setting
Setting
"Local.S :OFF"
"Local.S :OFF"
The local seek function is OFF.
The local seek function is OFF.
"Local.S :ON"
"Local.S :ON"
The local seek function is ON.
The local seek function is ON.
Tuning Mode <In Tuner mode>
Tuning Mode <In Tuner mode>
Sets the tuning mode.
Sets the tuning mode.
Tuning mode
Tuning mode
Display
Display
Auto seek
Auto seek
"Seek :Auto1"
"Seek :Auto1"
Preset station seek "Seek :Auto2"
Preset station seek "Seek :Auto2"
Manual
Manual
"Seek :Manual" Normal manual tuning
"Seek :Manual" Normal manual tuning
Auto Memory Entry <In Tuner mode>
Auto Memory Entry <In Tuner mode>
For the operation method refer to <Auto Memory Entry> (page
For the operation method refer to <Auto Memory Entry> (page
24).
24).
— 39 —
— 39 —
Operation
Operation
Automatic search for a
Automatic search for a
station.
station.
Search in order of the
Search in order of the
stations in the Preset
stations in the Preset
memory.
memory.
control.
control.
Advertisement
Table of Contents
