Service Note; How To Return The Pinch Roller, Guide Roller And Elevator Cam To Stop Mode; How To Return A Tape Into Cassette Half; How To Remove A Cassette Froma Machine If A Cassette Is Left - Sony SLV-E325EG Service Manual

SLV-E325EG/E475EG/E570EE/E570EG/E620B/E620VC/E720B/E720BZ/E720EE/
E720EG/E720EX/E720NC/E720NP/E720UX/E720VC/E720VP/E725NC
1. HOW TO RETURN THE PINCH
ROLLER, GUIDE ROLLER AND
ELEVATOR CAM TO STOP MODE
1) Remove the VHS MD assembly from the machine. (Refer to
section 2-4. Removal.)
2) Rotate the worm gear-1 of the cam motor beneath the MD
assembly in the direction arrow A using a screw driver tip.
1 Worm gear-1
2. HOW TO RETURN A TAPE INTO
CASSETTE HALF
A tape can be rewound into a cassette half by rotating the
flywheel-1 of the capstan motor in the direction of A with hand.
Flywheel-1

SERVICE NOTE

A
Front side of the
machine
Cam motor
Fig. 1
Timing belt
Front side
Fig. 2
3. HOW TO REMOVE A CASSETTE
FROM A MACHINE IF A CASSETTE
IS LEFT IN A MACHINE IN TROUBLE
Execute the section 2, and keep rotating the flywheel-1.
When executing section 1 to 3, take care that a tape slack
should not be caught by a mechanism or a tape should not
be damaged.
4. HOW TO REMOVE DRUM
ASSEMBLY
Drum assembly
2 Screw +P3 × 8
— 4 —
1 Remove connector
CN260 from RP-217
board.
Fig. 3