USING ELECTRIC POWER
WARNING
Make sure that the appliance is switched OFF before connecting it to
■
the generator.
Do not move the generator while it is running.
■
Be sure to ground the generator if the connected appliance is
■
grounded. Failure to ground unit may lead to electrical shock.
(1) AC APPLICATION
A
Single voltage type
(a) Check the voltmeter for proper
voltage.
This generator is thoroughly tested
■
and adjusted in the factory.
If the generator does not produce the
specified voltage, consult your
nearest
Robin dealer or service shop.
(b) Turn off the switch (es) of the electrical
appliance (s) before connecting to the
generator.
(c) Insert the plug (s) of the electrical
appliance(s) into the receptacle.
Check the amperage of the receptacles used referring to TABLE 1, and be
■
sure not to take a current exceeding the specified amperage.
Be sure that the total wattage of all appliances dose not exceed the rated
■
output of the generator.
− 12−
Voltmeter