Subaru RGX2900 Generator User Manual page 14

(e) Pull the starter handle slowly until
resistance is felt.
This is the "compression" point.
Return the handle to its original
position and then pull swiftly.
If the engine fails to start after several
■
attempts, repeat above procedures
with choke lever returned to "OPEN"
position.
Do not fully pull out the rope.
■
After starting, allow the starter handle
■
to return to its original position while
still holding the handle.
( f) After the engine started, return the
choke lever gradually to "OPEN"
position.
(g) Warm up the engine without a load for
a few minutes.
Choke lever
OPEN
− 11−
CLOSE