Replacing A Rear Turn Signal Light Bulb; Replacing The License Plate Light Bulb - Yamaha STAR 2015 Owner's Manual

Replacing a rear turn signal
light bulb
1. Remove the turn signal light lens
by removing the screws.
1. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
[ECA10682]
Periodic maintenance and adjustment
EAU42454
Replacing the license plate
light bulb
1. Remove the license plate light
cover by removing the bolts.
1. License plate light cover
2. Bolt
2. Pull the license plate light unit up
as shown.
1. License plate light unit
7-34
3. Remove the license plate light
EAU42486
bulb socket (together with the
bulb) by turning it counterclock-
wise, and then pulling it out.
1. License plate light bulb socket
4. Remove the burnt-out bulb by
pulling it out from the socket.
1. License plate light bulb
5. Insert a new bulb into the socket.
7