Yamaha STAR 2015 Owner's Manual page 26

Instrument and control functions
TIP
Push the " " side of the "SELECT"
switch to switch the display in the re-
verse order.
To reset a tripmeter, select it by push-
ing the " " or " " side of the "SE-
LECT" switch, and then push the
4
"RESET" switch for one second.
The fuel reserve tripmeter can be reset
manually, or after refueling and travel-
ing 5 km (3 mi), it will reset automatical-
ly and disappear from the display.
To set the clock
1. Clock
1. Push the " " or "
"SELECT" switch to change the
display to the clock.
2. Push the "
LECT" switch and the "RESET"
switch for two seconds. The hour
digits will start flashing.
3. Push the "
"SELECT" switch to set the hours.
4. Push the "RESET" switch and the
minute digits will start flashing.
5. Push the "
"SELECT" switch to set the min-
utes.
6. Push the "RESET" switch and
then release it to start the clock.
Self-diagnosis device
1
2
1. Error code display
2. Engine trouble warning light "
" side of the
" side of the "SE- This model is equipped with a self-di-
agnosis device for various electrical
circuits.
If a problem is detected in any of those
" or " " side of the circuits, the engine trouble warning
light will come on and the odome-
ter/tripmeter/clock display will indicate
an error code.
" or " " side of the If the odometer/tripmeter/clock display
indicates any error codes, note the
code number, and then have a
Yamaha dealer check the vehicle.
NOTICE
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
"
4-6
ECA11591