Table of Contents
Advertisement
Fire and explosion hazard: Solvent and paint fumes can ignite or explode.
To help prevent a fire and explosion:
D
Use only in an extremely well ventilated area.
D
Eliminate all ignition sources; such as pilot lights, cigarettes and plastic drop cloths (static arc hazard).
Do not plug or unplug power cords or turn lights on or off in spray area.
D
Ground Sprayer, object being sprayed, paint and solvent pails.
D
Hold gun firmly to side of grounded pail when triggering into pail.
D
Use only conductive airless paint hose.
Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids
D
containing such solvents in pressurized aluminum equipment. Such use could result in a chemical reac-
tion, with the possibility of explosion.
D
Do not fill fuel tank while engine is running or hot.
D
Do not flush with gasoline.
Fluid injection and high pressure hazard: High pressure spray or leaks can inject fluid into the body.
To help prevent injection, always:
D
Engage trigger safety latch when not spraying.
D
Keep clear of nozzle and leaks.
D
Never spray without a tip guard.
D
Do PRESSURE RELIEF if you stop spraying or begin servicing sprayer.
D
Do not use components rated less than sprayer Maximum Working Pressure.
D
Never allow children to use this unit.
If high pressure fluid pierces your skin, the injury might look like "just a cut". But it is a serious wound!
Get immediate medical attention.
Exhaust hazard: Exhaust contains poisonous carbon monoxide which is odorless and colorless. This
equipment must be used in well ventilated work areas only.
Alcohol and drug hazard: Do not operate this equipment under the influence of alcohol or while taking
medication that impairs your senses or reactions.
2
309654
WARNING
Advertisement
Table of Contents
