Minimize Wear And Avoid Damage - Stihl HTE 60 Manual

English
Minimize Wear and
Avoid Damage
Observing the instructions in this manual
helps reduce the risk of unnecessary
wear and damage to the power tool.
The power tool must be operated,
maintained and stored with the due care
and attention described in this owner's
manual.
The user is responsible for all damage
caused by non-observance of the safety
precautions, operating and maintenance
instructions in this manual. This includes
in particular:
– Alterations or modifications to the
power tool not approved by STIHL.
– Using tools or accessories that are
not approved for the power tool,
unsuitable or of inferior quality.
– Using the power tool for purposes
for which it was not designed.
– Using the power tool for sports or
competitive events.
– Consequential damage caused by
continuing to use the power tool with
defective components.
26
Maintenance Work
All the operations described in the
"Maintenance Chart" must be performed
on a regular basis. If these maintenance
operations cannot be performed by the
owner, they should be performed by a
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
regularly given the opportunity to attend
training courses and receive technical
information bulletins on engineering
changes.
If these operations are not carried out
as specified, the user assumes
responsibility for any damage that may
occur. Among other things, this includes:
– Damage to the motor due to neglect
or deficient maintenance (e.g. of
cooling air inlets).
– Damage due to incorrect electrical
connection (voltage, inadequately
rated connecting cords).
– Corrosion and other consequential
damage resulting from improper
storage.
– Damage and consequential
damage resulting from the use of
poor quality replacement parts.
Parts Subject to Wear and Tear
Some parts of the power tool are subject
to normal wear and tear even during
regular operation in accordance with
instructions and, depending on the type
and duration of use, have to be replaced
in good time. Among other parts, this
includes:
– Saw chain, guide bar
– Chain sprocket
HTE 60