Various Settings; Setting The Expression Pedal Function - Boss Space Echo RE-202 Reference Manual

Various Settings

Various Settings

Setting the Expression Pedal Function

By connecting an expression pedal (such as the Roland EV-5, sold separately) to the CTL 1, 2/EXP jack, you can operate the top
panel knobs except for the [MODE SELECTOR] knob.
You can set the respective sounds for when the expression pedal is at MAX position (pushed all the way up with your toes) and at
MIN position (pushed all the way down with your heel), and make continuous changes to them.
* Use only the specified expression pedal. Connecting expression pedals made by third-party manufacturers may cause this
unit to malfunction.
You can use different expression pedal settings for MANUAL and for each memory in MEMORY 1–4 respectively.
1. Use the [MEMORY] button to select the memory (MANUAL, MEMORY 1–4) for which you want to
configure the expression pedal.
2. Long-press the [INPUT] button.
The GUITAR indicator blinks.
3. Use the respective knobs to set the sound that's used when the pedal is at the MIN value (pushed all the
way down with your heel).
4. Press the [INPUT] button again.
The LINE indicator blinks.
5. Use the respective knobs to set the sound that's used when the pedal is at the MAX value (pushed all the
way up with your toes).
6. Press the [INPUT] button again to exit the function settings.
10