Ce Declaration Of Conformity - Genius SPIN 3 Installation Manual

Hide thumbs Also See for SPIN 3:

Manual for the installer (16 pages)

Table of Contents

IMPORTANT NOTES FOR THE INSTALLER

1. DESCRIPTION (Fig.1)

1.1. TECHNICAL SPECIFICATIONS

3. INSTALLING THE AUTOMATED SYSTEM

3.1. PRELIMINARY CHECKS

3.2. WALLING THE FOUNDATION PLATE

3.3. MECHANICAL INSTALLATION

4. START-UP

5. MANUAL OPERATION

6. RESTORING NORMAL OPERATION

7. MAINTENANCE

8. REPAIRS

9. AVAILABLE ACCESSORIES

9.1. SKIRT KIT

9.2. ARTICULATION KIT

9.3. END FOOT

9.4. FORK SUPPORT

9.5. BAR LIGHT KIT

9.6. BATTERY KIT

FAAC S.p.A.

Manufacturer:

Via Calari, 10 - 40069 Zola Predosa BOLOGNA - ITALIA

Address:

Declares that:

Operator mod. SPIN 3 - SPIN 4 - SPIN 424 - SPIN 6

• is built to be integrated into a machine or to be assembled with other machinery to create a machine under the provisions of Directive 2006/42/EC;

• conforms to the essential safety requirements of the following EEC directives:

• 2006/95/EC Low Voltage directive.

• 2004/108/EC Electromagnetic Compatibility directive.

• and also declares that it is prohibited to put into service the machinery until the machine in which it will be integrated or of which it will become a

component has been identified and declared as conforming to the conditions of Directive 2006/42/EEC and subsequent modifications.

Bologna, July 18

2014

The symbol

indicates notes that are important for the safety of persons and for the good condition of the automated system.

The symbol