Table of Contents
Advertisement
Multipart forms
The specifications for the dimensions of multipart forms are the same as those for single sheets and
continuous paper. See "Single sheets" on page 113 and "Continuous paper" on page 113 for
detailed information.
❏ The form sheets of continuous multipart forms should be securely joined together along the left
and right edges by crimping or, spot-gluing. For the best printing quality, use multipart forms
joined with spot-gluing.
spot-gluing
1. 1 inch or less
2. 3 inches or less
3. printing side
4. 1 inch or less
5. 3 inches or less
Caution:
!
Never use continuous multipart forms that are joined with metal staples or bar-gluing.
1. bar-gluing
2. metal stapling
❏ The thickness of the folded part when extended should be 1 mm or less.
crimping
spot-gluing and crimping on
* 1 mm or less
LQ-780/LQ-780N
User's Guide
each side
Product Information
116
Advertisement
Table of Contents
