Gigabyte AMD785G Manual page 40

Press [2] key, the interface of RAID, as figure 4.
RAID function:
Choose LD 1 then press Enter.
Take Raid0 for example, use [↑] [↓] to shift the cursor, press space key to change the
choice, press [Ctrl-Y] to keep.
Set Assignment mode as [Y], press [Ctrl-Y] to keep , then figure 5 appeared, erase the
MBR. choose [Ctrl-Y],figure 6 appeared. Press any key, finished the RAID.
[figure3]
RAID 0/ RAID 1/ RAID 10
[figure4]
38