5) The water supply pipe is located right under the spray tube. Remove the water
supply pipe from the evaporator, pinch and shift the hose clamp, and disconnect the
hose.
6) The spray guide is located under the water supply pipe. Pull off the spray guide from
the evaporator plate.
7) Refit the removed parts in the reverse order of the removal procedure. Check for
water leaks.
Fit the spray guide securely and tightly on the evaporator fin. Otherwise,
cloudy or irregular ice cubes or performance reduction may be caused.
8) Plug in the icemaker.
Black Rubber Cap
Water Supply Pipe
Spray Guide
IMPORTANT
Tab
79
Spray Tube
Hose Clamp