Cleaning And Storage - Silvercrest KH 2173 Operating Instructions Manual

e) Alarm function and hour signal
• Press the button MODE
indicator "AL" (Alarm time) appears.
• To switch the alarm function on, repeatedly press the button SET
three lines are shown above the double-point in the display. To switch the
alarm function off, repeatedly press the button SET
are no longer shown.
• To have a signal tone sound on every full hour, press repeatedly on the
button SET
point. To switch the hourly signal tone function off, repeatedly press the
button SET
f) To leave the adjustment mode
• Repeatedly press the button MODE
• Using the button SET
When everything is programmed as described, a signal tone will sound at
the scheduled alarm time and continue until you press any button. For as long
as the alarm function remains activated, the appliance will repeat the alarm
notification every day.

Cleaning and storage

• Clean the appliance with a dry or lightly moistened cloth only. To avoid
potential damage to the surfaces, do not use any detergents or abrasive
cleaning agents.
• If you do not intend to use the appliance for longer than a year, remove
the batteries. Store the appliance in a dry location.
. In the display all positions blink and the
until a bell symbol appears in the display below the double-
until the bell symbol is no longer shown.
you can flip through all adjustments.
until only the time is shown.
- 8 -
until
until the three lines