Table of Contents
Advertisement
Overview Installation Troubleshooting Contact
6
Click OK. The WEP CONFIGURATION fields now appear something like this:
Before performing step 7, consider the following:
•
If all of your wireless adapters support 128-bit encryption, you can select Enable 128 Bit. Otherwise, you
must select Enable 64 Bit.
•
For a WLAN client equipped with a Motorola wireless adapter, you can enter the WEP Passphrase when
you perform
"Configuring a Wireless Client for
need to enter the generated WEP key that you designate in step 7.
7
Under WEP CONFIGURATION, set:
WEP
Sets whether shared key authentication is enabled to provide data privacy on the WLAN:
Authentication
•
•
Encryption
Use a WEP key length that is compatible with your wireless client adapters. Choose one of:
•
•
Key Type
Select the active key (1 to 4). Only one key can be active. You can generate WEP keys from a
passphrase as described in steps 4 to 6 or type non-case-sensitive
(Key 1 to Key 4)
to 9 and A to F to define up to:
•
•
We recommend changing the WEP keys frequently. Never provide the WEP key to anyone
who is not authorized to use your WLAN.
8
Click Save Changes to save your changes.
If you need to restore the wireless defaults, click Reset
VT2400/VT2500 Series Voice Gateway User Guide
Configuration: Basic
Open System — Any WLAN
authentication. It is the default, if the Security Mode is set to WEP.
Shared Key — The
VT2500
shared key authentication enabled. We recommend this setting.
Enable 64-Bit — Use only if you have wireless clients that do not support 128-bit encryption
Enable 128-Bit — We recommend this setting for stronger encryption; it is supported by the
Motorola WN825G and WPCI810G wireless adapters and most current wireless adapters
Four 10-character long key 64-bit WEP keys
Four 26-character long 128-bit WEP keys
FAQ Specifications Glossary License
Advanced
TCP/IP
WEP". For all other wireless adapters, you will probably
client
can transmit data to any other client without
authenticates and transfers data to and from all clients having
Security
Defaults.
Wireless
hexadecimal
characters 0
99
Advertisement
Table of Contents
