Setting Up Your Wireless Lan (Wlan) - Motorola VT2500 User Manual

Overview Installation Troubleshooting Contact

Setting Up Your Wireless LAN (WLAN)

You can use the VT2500
Caution!
To prevent unauthorized eavesdropping or access to WLAN data, you must enable wireless security. The
default VT2500
wireless security.
To enable security for your WLAN, you can do the following on the VT2500:
To
Encrypt wireless transmissions
and restrict WLAN access
Further prevent unauthorized
WLAN intrusions
Connect at least one computer to the
the VT2500 over a wireless connection.
You need to configure each wireless client (station) to access the
Wireless Clients".
Caution!
Never provide your ESSID, WPA or WEP passphrase, or WEP key to anyone who is not authorized to use
your WLAN.
For descriptions of all wireless configuration fields, see
Another step to improve wireless security is to place wireless components away from windows. This decreases
the signal strength outside the intended area.
VT2400/VT2500 Series Voice Gateway User Guide
Configuration: Basic
as an access point for a wireless LAN (WLAN) without changing its default settings.
settings provide no wireless security. After your WLAN is operational, be sure to enable
Perform
Encrypting Wireless LAN Transmissions
Restricting Wireless LAN Access
VT2500 Ethernet port to perform configuration. Do not attempt to configure
FAQ Specifications Glossary License
Advanced TCP/IP
Use in Setup Program
Wireless > SECURITY — basic
Wireless > SECURITY — advanced
page
VT2500 LAN as described in
"Wireless Pages in the VT2500 Setup
Wireless
page
"Configuring the
Program".
94