Specifications And Requirements - Fetco MBS-1221 Users Manual And Operator Instructions

Water Requirements:
Water inlet fitting is a 1/4 inch male flare
Pressure: 20-75 psig, (138-517kPa) 1½gpm/(5.7lpm)
For Iced tea: brewer is factory calibrated to a non-fluctuating
stable water supply pressure at 45 psi.
Water supply: (Optimal) 100-150TDS
All beverage equipment must use filtered water
Brew Volume-Coffee: Full Batch 2.20 liters
User adjustable to up to 0.85 gallon/3.25 liters per brew
Brew Volume-Iced Tea: Full Batch 11.40 liters/3 gallons
User adjustable to up to 4.9 gallon/18.7 liters per brew
Brew batch and dilution ratio user adjustable
Total Brew Cycle—Factory default setting (Batch 1): 5 minutes=[3:30 minute brew time + 1:30 minute drip delay]
Iced Tea-(Batch 3) 4:30 minutes=[3:00 minute brew time + 1:30 minute drip delay] Batch 2 may be set for either
Brew-Process parameters are user controllable for: Brew Volume, Brew Time, Prewet Percent and Delay,
Drip Delay, Tea Batch Temperature, Dilution Volume and Dilution Timing (with brew or after brewing)
Electrical Specifications for domestic-dual voltage Standard height with brew shelf
SKU
Model description
M1221US-1A117-PM001 NEMA 15-5P
M1221US-1A117-MM001 NEMA 15-5P
M1221US-1X117-PM001
Domestic-Dual Voltage
M1221US-1X117-MM001
Domestic-Dual Voltage
Electrical Specifications for domestic-dual voltage Short version - no brew shelf
SKU
Model description
M122SUS-1X117-PM001
Domestic-Dual Voltage
Factory supplied with 120 volt NEMA 5-15 cord and plug. Dual voltage brewers may be field converted to 200-240 volts-see pages 13 and 19
International
SKU
M1221IN-1B130-PM005
M1221NM-1X117-PM001
DUAL VOLTAGE
M1221CE-1B130-PM005
M1221CE-1B130-PM006
G
W
NEMA 5-15P
Plug Configuration
Go to fetco.com for the latest versions of all information

Specifications and Requirements

Electrical
Brew Basket
Connection
Plastic tea
Metal coffee
Metal tea
Plasic coffee
Plastic tea
NEMA 15-5P
Terminal Block Plastic coffee
Plastic tea
NEMA 15-5P
Terminal Block Metal coffee
Electrical
Brew Basket
Connection
Plastic tea
NEMA 15-5P
Terminal Block Plastic coffee
Electrical
Brew Basket
Connection
Plastic tea
CEE 7/7
Plastic coffee
Plastic tea
NEMA 15-5P
Terminal Block Plastic coffee
Plastic tea
CEE 7/7
Metal coffee
Plastic tea
UK1-13P
Metal coffee
Export Only 250V 16 A Export Only 250V 13 A
BS 1363A UK
"Schuko" CEE 7/7 PLUG
Electrical: Supplied with 120V cord & plug
User adjustable to 220-240 volt terminal block
Tank Temperature, as set by factory:
200°F (93°C) inside water tank (at sea level)
Iced Tea Batch Temperature-user adjustable
200°F-207°F-/ 93°-98°C
Iced Tea Dilution Ratio: 1:4 factory set brew to water
Factory setting adds 2.4 gallons of cold water to 0.6 gallon
brew for a 1:4 ratio Iced tea
(2.3liter brew/9.1 liter dilution)
Dilution volume is user adjustable from 0-4Gal;0-15.2L
Heater
Voltage
Configuration
1 X 1.7 kW 120
1 X 1.7 kW 120
1 X 1.7 kW 100-120
1 X 3.0 kW 200-240
1 X 1.7 kW 100-120
1 X 3.0 kW 200-240
Heater
Voltage KW
Configuration
1 X 1.7 kW 100-120
1 X 3.0 kW 200-240
Heater
Voltage
Configuration
1 X 3.0 kW 200-240 2.1-3.0 10.9-13.0 4.4 gal/16.5 liters
1 X 1.7 kW 100-120
1 X 3.0 kW 200-240
1 X 1.7 kW 230
1 X 1.7 kW 230
User Guide & Operator instructions
Page 2
Amp
KW Brew Volume/Hour
Draw
1.7 14.7 4.4 gal/16.5 liters
1.7 14.7 4.4 gal/16.5 liters
1.3-1.8 12.3-14.7 4.4 gal/16.5 liters
2.2-3.1 10.9-13.0 6-7 gal/22-21 liters
1.3-1.8 12.3-14.7 4.4 gal/16.5 liters
2.2-3.1 10.9-13.0 6-7 gal/22-21 liters
Amp
Brew Volume/Hour
Draw
1.3-1.8 12.3-14.7 4.4 gal/16.5 liters
2.2-3.1 10.9-13.0 6-7 gal/22-21 liters
Amp
KW Brew Volume/Hour
Draw
1.3-1.8 12.3-14.7 4.4 gal/16.5 liters
2.2-3.1 10.9-13.0 6-7 gal/22-21 liters
2.8 12.5 4.4 gal/16.5 liters
2.8 12.5 4.4 gal/16.5 liters
MBS-1221 P202Re0August 2021