H Save & Exit - Fetco MBS-1221 Users Manual And Operator Instructions

H SAVE & EXIT
The brewer will save changes only from the "H" menu. DO NOT reboot brewer or toggle ON/OFF-exit as below.
TO EXIT PROGRAMMING & HOW TO SAVE CONTROL SETTING CHANGES
HOW TO SAVE CHANGES AND EXIT-The brewer is in PROGRAMMING mode
A convenient way to access the steps is to remember to scroll to EXITYES and to SAVE YES
Programming A-H
A-H
STOP
From any screen- From the "H" screen
Press STOP button
until the EXIT ("H")
screen appears
User Settings will be erased and overwritten to factory default settings by the following five programming changes
NOTE:
1) When setting or changing units of display for the tank temperature (F Fahrenheit or C Celsius). (SETTING B4)
2) When setting or changing units of display for the volume (L liters, G gallons).
3) When setting brewer model The software sets equipment to brewer defaults
4) When loading from USB (Reprograms settings)
5) When restoring defaults (Reloads to defaults )
Go to fetco.com for the latest versions of all information
Saving changes and exiting PROGRAMMING
EXIT
H NO +
STOP
STOP
From EXIT screen
Press button 2 to Press button 1 to
toggle to the EXIT- toggle to the SAVE
YES screen
EXIT
H YES -
H
STOP
From SAVE screen
Press button 2 to
toggle to the SAVE-
YES screen
screen
User Guide & Operator instructions
Page 13
.
SAVE
SAVE
NO +
H
STOP
To SAVE and EXIT
Press button 1 to
SAVE your changes
and EXIT to
OPERATING MODE
(SETTING B5)
(SETTING F3)
(SETTING F9)
(SETTING E10)
MBS-1221 P202Re0August 2021
YES -