Wacom Intuos Pro Manual page 35

Customizing On-Screen Controls
To customize a Screen Key panel:
1. Select the name of the panel in the Panels list.
2. Select the functions for each of the keys from the dropdown menus under Key Assignments. Each
key will display the function you assign to it.
3. If you select Keystroke as your assigned function, the Keystroke dialog box will open for you to
enter the keystrokes.
Note: You can assign a function to as many of the keys as you like. However, at least one key must
be assigned a function in each Screen Key panel for the panel to be displayed on the screen.
4. Change the order of the dropdown menus in the Key Assignments list, using the Drag icon to the
left of the menu to drag the menu to a new position in the list.
5. Set a key function to repeat on button hold by clicking the Repeat checkbox to the right of the Key
Assignment.
6. Change the position of a Screen Key panel by holding down the drag bar at the top of the panel with
your pen, mouse, or finger and dragging the panel to the new position.
In the New Panel dialog:
1. Change the layout of a Screen Key panel by clicking on the desired Layout icon on the New Panel
dialog.
2. Set the overall size of the panel by adjusting the Size slider. The panel will also resize to adjust to
the number of assigned keys on the panel.
3. Display the panel at the location of the cursor by clicking the Display at cursor checkbox.
The above screenshot is for descriptive purposes; it may not match your screen.